Used Citroen Relay Hub Assembly
All used Citroen Relay Hub Assembly listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices or used OEM car parts up to 80% cheaper than main dealer prices for Citroen Relay from premium breaker yards from across the UK.
About Hub Assembly
What is the hub assembly/what does it do?
A hub assembly is a critical set of components that together allow a car’s wheels to rotate smoothly while being able to move up and down with the suspension and swivel with the steering. The hub assembly connects the wheels, brakes, driveshafts (driven wheels), steering (front wheels) and suspension together allowing all to work as a system.
Getting into the details of the hub assembly
For front wheel drive cars the front hub assembly consists of a wheel hub carrier, the hub assembly and a wheel bearing. The hub carrier is mounted to the suspension and steering system and as its name suggests holds or carries the hub assembly. The hub assembly rotates freely within the hub carrier on the wheel bearing, which generally consists of an inner and outer set of roller bearings. Brake disks and wheel rims are bolted to the hub assembly. The driveshaft passes through a hole in the centre of the carrier to the hub assembly to provide drive to the wheels.
A rear non driven hub assembly is similar to the front although does not incorporate a driveshaft. In some cases the hub assembly may incorporate a stub axle. The bearing is more likely to be a tapered race bearing and with inner and outer races often separated by a spacer.
Driven rear wheel hub assemblies are generally similar to that of a front wheel drive front in that they contain roller bearings and the carrier has a hole or hollow to allow the driveshafts to enter the hub. Similarly the undriven front wheels are similar to the rear wheels of a front wheel drive car.
For all types of car the hub assembly is located directly behind each wheel and is generally accessed with the wheel removed.
What if something goes wrong with the hub assembly?
The most common cause of issues with the hub assembly is linked to the wheel bearings. Due to the high levels of wear they require routine maintenance as specified by the manufacturer. Generally speaking at some point in the vehicle's life the wheel bearing will need to be replaced, as the metal components are likely to wear beyond acceptable tolerances.
Other components that are likely to require maintenance or replacement include nuts and washers, during routine maintenance of the hub assembly. Also for some cars dust covers, split pins and spacers may need to be replaced.
A useful preventative measure is to ensure that all wheels are fitted with hub caps or wheel trims as this helps to keep road grime and grit out of the hub assembly, reducing the likelihood of premature wear and corrosion.
Citroen trivia
- Between 1925 and 1935, the Eiffel Tower was just a big, pointy billboard with the word 'Citroën' in bright lights from top to bottom. This was the first use of lights to advertise on the tower, and Citroën renewed the adverts every year until they were bought out by Michelin.
- Thanks to Citroën, the French driver Sebastien Loeb is the single most successful driver in the entire history of the World Rallying Championship. Nine consecutive driver's titles were won by Loeb in the time between 2004 and 2012, driving cars such as the Xsara, the C4, and the DS3.
- Buying Maserati was definitely a mistake for Citroën. The SM model didn't sell well, and that led to financial difficulties that meant the car company was eventually acquired by Peugeot.
- If you went into a Citroën showroom in the 20s, there's a good chance that you would have been given a letter that was personally handwritten by Andre Citroën himself, proclaiming the benefits of the car models. This one act of marketing genius is credited with being responsible for thousands of closed sales.
- In 1968, Citroën bought control of the Italian car firm Maserati. That purchase led to the design of the Citroën GT, which came with hydro-pneumatic suspension and a V6 engine. It did well in terms of sales, but production of the last version, the DS23 Pallas Electronique, was stopped in 1975 after the '73 oil crisis.