Find parts for your car
Models
- A Class (15) Apply A Class filter
- B Class (1) Apply B Class filter
- C (1) Apply C filter
- C CLASS (1) Apply C CLASS filter
- C Class (27) Apply C Class filter
- Citan (1) Apply Citan filter
- CLA (3) Apply CLA filter
- CLK (3) Apply CLK filter
- Colt (1) Apply Colt filter
- E Class (40) Apply E Class filter
- Forfour (1) Apply Forfour filter
- Ibiza (1) Apply Ibiza filter
- M Class (1) Apply M Class filter
- R Class (1) Apply R Class filter
- S Class (2) Apply S Class filter
- Viano (1) Apply Viano filter
- Vito (4) Apply Vito filter
Parts
- Engine Bare (78) Apply Engine Bare filter
- Engine Complete Full (78) Apply Engine Complete Full filter
- Engine Reconditioned (78) Apply Engine Reconditioned filter
- Engine with Ancils (78) Apply Engine with Ancils filter
- Hot film mass airflow meter (78) Apply Hot film mass airflow meter filter
- Inlet Manifold Gasket (18) Apply Inlet Manifold Gasket filter
- Inlet Manifold Metal (18) Apply Inlet Manifold Metal filter
- Inlet Manifold runner control module (96) Apply Inlet Manifold runner control module filter
- Intake ducts (96) Apply Intake ducts filter
- Intake Manifold Flap Motor (97) Apply Intake Manifold Flap Motor filter
- Magneto (78) Apply Magneto filter
- Oil Dipstick (78) Apply Oil Dipstick filter
- Oil Level Sensor (78) Apply Oil Level Sensor filter
- Oil Pressure Sensor Switch (78) Apply Oil Pressure Sensor Switch filter
- Starter solenoid (78) Apply Starter solenoid filter
- TDC Sensor (78) Apply TDC Sensor filter
- Throttle Position Sensor (78) Apply Throttle Position Sensor filter
- Timing Cam Belt Kit (78) Apply Timing Cam Belt Kit filter
- Timing Cam Belt Tensioner (78) Apply Timing Cam Belt Tensioner filter
- Turbo & Manifold (78) Apply Turbo & Manifold filter
Used Mercedes-Benz Intake Manifold Flap Motors
All used Mercedes-Benz Intake Manifold Flap Motors listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Mercedes-Benz from premium breaker yards from across the UK.
About Intake Manifold Flap Motors
The engine needs oxygen from the air in order for combustion to work. It's imperative that the car's engine is supplied with the correct amount of clean, filtered air. Air needs to be as clean as possible before it mixes with the fuel and burns in the cylinders of the engine. The overall result of this ensures the engine is working to its optimum, providing more power and fuel efficiency. A car's air intake system consists of several vital components that work together to ensure the air entering the engine is a steady and uninterrupted flow of clean, filtered air. The inlet manifold ensures the air or fuel/air mixture is provided to the inlet/intake ports in the cylinder heads in the engine. The Mercedes-Benz intake manifold flap motor functions to help to bring the engine to a halt faster by shutting off the air supply to the intake.
The intake manifold flap motor is the flap at the entrance to the EGR valve, built into the EGR housing but separate to the EGR valve, located between the exhaust and inlet manifold, and can be seen when the intake hose is removed.
The inlet manifold, consists of a selection of pipes or tubes, usually manufactured from a specialised strong plastic, that function to deliver the air equally to each of the cylinder heads in the engine. This vital part works to ensure the air is divided evenly, so an equal quantity of air is flowing into each of the cylinders at the same time, so that precisely the right amount of air can mix with precisely the right amount of fuel in the cylinders in order for combustion to occur. Usually when the engine is running the intake manifold flap motor is in the open position, allowing air to reach the engine. The Mercedes-Benz intake manifold flap motor shuts when the engine is stopped and is essentially an anti-shudder valve, helping to stop the shudder/shake that occurs when the engine is stopped. It helps to bring the engine to a halt faster by shutting off the air supply to the intake.
If this component breaks when the valve is open you may notice the engine shaking excessively when you shut the engine off. If this part breaks when in the closed position it can become jammed shut and the engine will not start as the air supply will be blocked and the engine won't get any air. Replacing this part with a Mercedes-Benz intake manifold flap motor will provide a part that fits securing, works well and lasts longer.
Mercedes-Benz trivia
- Karl Benz might have patented the design of his Motorwagen in 1886, but it was his wife who jumped behind the wheel first for a quick (as quick a 0.9hp will deliver) 120-mile tour through the countryside of Germany. Poor Karl didn't even know!
- Nepal had very few roads at the time, but the car company still gifted a shiny new Merc to the king of the country in 1940. It was the first car that had ever been in Nepal!
- If you thought self-driving cars were all about Tesla, then it might surprise you to know that Mercedes Benz made an autonomously driving vehicle as early as 1995. It didn't gain popularity, but it became the foundation of the modern driving technology found in every Mercedes Benz.
- We all recognise that distinctive Mercedes logo, but did you know that the three points of the star represent air, land, and water? There was a point where they considered adding another point to represent space, but they decided against it in the end.
- Karl Benz obviously gave his name to the company, but the Mercedes part of the name comes from the daughter of his customer and friend, Emil Jellinek. Her name was (obviously) Mercedes, and it's still surprising that her name remains so attached to the iconic car brand.