Used Land Rover Anti Roll Bar Bushs

All used Land Rover Anti Roll Bar Bushs listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Land Rover from premium breaker yards from across the UK.

About Anti Roll Bar Bushs

A Land Rover anti roll bar bush is an essential part of the suspension system of a vehicle. The job of the anti-roll bar is to balance movement of the vehicle when cornering and minimising side to side movement, preventing the vehicle from leaning or rolling over. It is particularly useful in high wind situations. These are fitted on the front and rear of the suspension.

The bushes on an anti-roll bar are made of a strong rubber and secure the anti-roll bar in place. They are always fitted to the front suspension of the vehicle, but it’s becoming more common for them to also be fitted to the rear suspension too. They take a large amount of strain from the forces of the anti-roll bar. This means that over time they will wear thin and become less effective or crack and dry out through use. They’re also subject to disintegration if they come in to contact with oil.

It’s recommended that Land Rover anti-roll bar bushes are checked and replaced regularly. Both sides should be replaced at the same time as if one bush is damaged, its pair will most likely be damaged too.

Land Rover trivia

• One of the most unique vehicles ever was the floating SUV designed and built by Land Rover. Unfortunately, the Floating Ninety Defender led many drivers to believe that their own Land Rovers could also float, and many cars were driven into lakes as a result.
• In 2012, Land Rover hired Posh Spice as their temporary creative director. Victoria Beckham was the key to the design of the Evoque Special edition. It came with a hand-finished matte paint job, mohair floor mats, and a matching four-piece luggage set.
• Most cars get an immediate redesign after the prototype is designed. Not with the Range Rover, however! The 1966 design was considered perfect as it was, which never happens in the automotive industry. The Range Rover is considered a work of art, and one of them is even on display in the Louvre.
• The designer Charles S. King worked with Rolls Royce to design jet engines before going on to build the Range Rover. King would go onto building a car around those jet engines that then held the world land speed record, the first turbine-powered vehicle to do so.
• Inspired by the Jeeps that had been used in WWII, the first Land Rover's steering wheel was in the middle of the dashboard. This was partly to counter the need to create left and right-hand drive models for different countries.